I want to configure SNMP on my cisco 26xx series router, i have solarwinds configure on my one of the desktop now i want to configure the SNMP to make communication between both Solarwinds and cisco routers, then what are the configuration and understanding require in order to make it function properly. I am also looking for some good link for the same.
Here's a good basic overview of configuring SNMP on an IOS device. The guide is for 12.2 which covers SNMPv1, v2c, and v3. However, you will probably want to focus on the v1/v2c pieces regarding SNMP community strings. That is probably a good place to start:
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...