I'm having a bear of a time trying to get SNMP to work on a 1000v. Here's the current SNMP configuration:
show run snmp all
!Command: show running-config snmp all !Time: Mon Apr 21 10:55:17 2014
version 4.2(1)SV1(5.1) logging level snmpd 7 snmp-server aaa-user cache-timeout 3600 snmp-server protocol enable no snmp-server globalEnforcePriv snmp-server tcp-session auth snmp-server user admin network-admin auth md5 <redacted> priv <redacted> localizedkey snmp-server community <redacted> group network-operator snmp-server community <redacted> use-acl SNMP-V1-RO
show ip int bri IP Interface Status for VRF "default"(1) Interface IP Address Interface Status UI-1000v-TEST# show ip int bri vrf all IP Interface Status for VRF "default"(1) Interface IP Address Interface Status
IP Interface Status for VRF "management"(2) Interface IP Address Interface Status mgmt0 172.20.255.230 protocol-up/link-up/admin-up
I'm guessing that this has something to do with the fact that I'm using the management vrf for connectivity to the 1000v. I think the SNMP process is bound to the default vrf. I fired up ethanalyzer on the 1000v and I can definitely see the SNMP queries hit the 1000v. It just doesn't respond. What else do I need to apply to the 1000v in order for it to respond to my SNMP queries?
We are pleased to announce availability of Beta software for 16.6.3. 16.6.3 will be the second rebuild on the 16.6 release train targeted towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are looking for early feedback from custome...