>> 1) can modify Router/Switch Configs from Cisco Works
>> 2) Archive of Router/Switch Configs to Cisco Works.
If I had SNMP & TFTP from the routers & switches to Cisco Works, The Archive Config process will detect a config change via SNMP and if a config has changed then SNMP will TFTP the startup config to the shadow directory?
I still don't think RME processes SNMP traps. AFAK, syslog is the only source that triggers ad-hoc Archive Config (see RME - Tools - Syslog - Automated Actions - Config Fetch). If LMS is going to lose SSH/telnet access, RME could still fetch the startup/running configs and vlan.dat via TFTP. OTOH, ASA/PIX/FWSM firewalls are SOL because they're archived through SSH/telnet (see the latest discussion here: https://supportforums.cisco.com/thread/2005580?tstart=0)
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.