Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMP-question Prime 2.0x

Hello,

I am wondering if it's possible to build a template that I can deploy to x-number of switches that would insert a value in a specific field in the snmp-location string.

Our current snmp-server location string looks like this.

core-city-streetname/more specific information about the location of the switch. For example:

got-gothenburg-vasag32/level2/room58/standAB01

Now I would like to with the help of Prime 2.0 insert a value like this,(see the red text):

got-gothenburg-vasag32-512/level2/room58/standAB01

Is this possible? and if it is how would I do it?

Thank you.

Best regards,

Martin

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

SNMP-question Prime 2.0x

Hi Martin,

this feature is called  "BASELINE TEMPLATE " ,which is availble in LMS .however in PI  ,it is not supported yet.

In future we may have equvialent support availble in PI as well.

check the below link:

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html

Thanks-

Afroz

[Do rate the useful post]

*****Ratings Encourages Contributors *****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
3 REPLIES
Cisco Employee

SNMP-question Prime 2.0x

Hi Martin,

go to Desing >feature design > My tempate

create a new tempalte with the CLI command " got-gothenburg-vasag32-512/level2/room58/standAB01"

and then Depoy it..

this should help

Thanks-

Afroz

[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

SNMP-question Prime 2.0x

Hi,

Thank you for your answer.

I must admit I was a bit unclear about what I wanted.

Your suggestion would work for switches that I am certain that they should have that snmp location string.

I was more after a way to make Prime search/scan the current snmp location string of a switch or several switches and if Prime would find the right value say it begins like:

got-gothenburg-vasag32

If it does then insert value -512 after:

got-gothenburg-vasag32-512

Thanks,

Martin

Cisco Employee

SNMP-question Prime 2.0x

Hi Martin,

this feature is called  "BASELINE TEMPLATE " ,which is availble in LMS .however in PI  ,it is not supported yet.

In future we may have equvialent support availble in PI as well.

check the below link:

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html

Thanks-

Afroz

[Do rate the useful post]

*****Ratings Encourages Contributors *****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
193
Views
0
Helpful
3
Replies
CreatePlease login to create content