snmp-server enable traps bridge

[mikedelafield]

Hi.

I am trying to enable SNMP traps for STP topology updates.

Is the following trap sufficient?

snmp-server enable traps bridge

I have read other posts indicating to use newroot and topologychange commands but neither of these are available on my switch.

Cisco 4000 L3 Switch. IOS 12.1

Thanks.

[aghaznavi]

12.1 version supports only following features for STP SNMP trap

snmp-server enable traps :

To enable SNMP notifications (traps or informs), use the snmp-server enable traps command. To disable all SNMP notifications, use the no form of this command.

snmp-server enable traps [flash [insertion | removal] | fru-ctrl | port-security [trap-rate trap-rate] | removal | stpx | vlancreate | vlandelete | vtp] [mac-notification [change | move | threshold]

no snmp-server enable traps [flash [insertion | removal] | fru-ctrl | port-security [trap-rate trap-rate] | removal | stpx | vlancreate | vlandelete | vtp] [mac-notification]

for more features you should upgrade the higher versions.