Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Snmp Trap Question on Cisco FMC managed ASA

Hi

topic: configuring snmp traps on asa managed by firepower management FS2000.

We recently configured /enabled snmp traps using the Cisco FMC gui. we have got a couple of asa (thread defence devices) managed by FMC.

-How can i do a test on the ASA and validate the traps are coming over to our snmp server (configured via fmc ). Any test commands exist?

-What commands other than show snmp statistics are there to see traps.  i could see x number of Traps PDUs  as outcome of above commands- does that mean traps are working?

-What debugging if any can be used specific to traps.

-Where can i see the historic traps generated

-Can we tell cisco to write the traps to a local file also along with sendning to the snmp server.

second question

the same FMC manages a few more ASAs at a different geographic location where we want traps to be sent a different snmp server

-How can we point those ASAs to a second snmp trap destination.

NB: we configure Trap from the Platform Settings under Devices from the Cisco Firepower management center console.

Everyone's tags (1)
64
Views
0
Helpful
0
Replies
CreatePlease login to create content