Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

snmp traps Err-disable reports missing informations

Dear all,

I wanted to be informed when a port has been put in a err-disable state on my network management station.

I configured on my nodes the function snmp-server enable traps errdisable.

I imported the Cisco MIB CISCO-ERR-DISABLE-MIB.my on the NMS.

Now I'm getting the traps but somehow I cannot have in the trap the port/interface that is currently in err-disable state.

Here you can see a trap I received from the node :

Trap cErrDisableInterfaceEvent (.1.3.6.1.4.1.9.9.548.0.1.1) at 10. janvier 2012 13:04:03 CET from xxx.xxx.xxx.xxx

Version: SNMPv3

Varbinds:

state=HAS_VALUE type=TimeTicks oid=.1.3.6.1.2.1.1.3.0 value=2070924876

state=HAS_VALUE type=OBJECT IDENTIFIER oid=.1.3.6.1.6.3.1.1.4.1.0 value=.1.3.6.1.4.1.9.9.548.0.1.1

state=HAS_VALUE type=INTEGER oid=.1.3.6.1.4.1.9.9.548.1.3.1.1.2.10010.0 value=2


I have the feeling an OID like 1.3.6.1.4.1.9.9.548.1.3.1 should be in the trap to tell me which port is concerned by this.

Do I need to configure something else on the switch?

Do I need to import another MIB ?

Thank you for your comments

Regards

  • Network Management
1620
Views
0
Helpful
0
Replies
This widget could not be displayed.