Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SNMP v3 traps

Hi all,

I have this configuration:

snmp-server group RTR-group v3 priv notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF0F

snmp-server ifindex persist

snmp-server trap-source Loopback2

snmp-server source-interface informs Loopback2

snmp-server packetsize 4096

snmp-server trap-timeout 120

snmp-server queue-length 30

snmp-server system-shutdown

snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart

snmp-server enable traps envmon

snmp-server enable traps bgp

snmp-server enable traps config

snmp-server enable traps entity

snmp-server host x.x.x.x version 3 priv n@c-try

(obviously i have defined the user n@c-try with the correct md5/des key).

if I do an snmp walk towards my routers From the management station all works fine; but if my router sends a trap (v3) to the management station..i see anything arriving...If i send the trap as v1/v2 there are no problem!

Have someone any idea?

Thanks in advance

Gianluca

1 REPLY
Silver

Re: SNMP v3 traps

It's possibly due to a bug or if you are using cw2k then it dosen't support SNMP v3

595
Views
0
Helpful
1
Replies