Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

snmp version 3 configuration for LMS

Hi I m trying to configure snmp v3 on my devices so that i can add these devices in LMS but it is not working properly..below is the configu which i hv done on devices please provide your input if i have missed something or configured wrongly..

snmp-server group snmpro v3 priv read ro access 80

snmp-server group snmprw v3 priv write wr access 80

snmp-server user snmpwr@bw snmprw v3 auth md5 $nMP@BW! priv 3des $nMP@BW! access 80

md5 $nmpread@BW! pri 3des $nmpread@BW! access 80

snmp-ser host 10.2.6.3 version 3 priv snmprw

snmp-ser host 10.2.6.3 version 3 priv snmpro

1 REPLY
Cisco Employee

Re: snmp version 3 configuration for LMS

What are the definitions of your ro and wr views? What is the definition of access-list 80, and what is the IP of your LMS server? It really looks like you've confused concepts from community string-based SNMP with USM-based SNMP.

This is what I'd do:

snmp-server group snmpro v3 priv access 80

snmp-server group snmprw v3 priv write v1default access 80

snmp-server user snmpwr@bw snmprw v3 auth md5 $nMP@BW! priv 3des $nMP@BW! access 80

snmp-server user snmpro@bw snmpro v3 auth md5 $nmpread@BW! priv 3des $nmpread@BW! access 80

Then, if the LMS server is 10.2.6.3, you can't send v3 notifications to it. You will need to configure v1 or v2c notifications. For example:

snmp-server host 10.2.63 version 2c public

390
Views
0
Helpful
1
Replies