cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8029
Views
2
Helpful
2
Replies

SNMP version

right_guy12
Level 1
Level 1

Hi!

I wanted to know - How can I determine what version of SNMP is running on my switch system. What is the command for the same?

Thanks!

2 Replies 2

spremkumar
Level 9
Level 9

hi

one way would be the check out whether you have defined any security model in your snmp config.

especially with this command snmp-server host .

It also depends on the ios code you are running which have the support for the different versions of SNMP.

regds

Jason Davis
Cisco Employee
Cisco Employee

If you have

snmp-server community XYZ ro|rw

then you have SNMP v1 and v2c enabled

If you have

snmp-server user|group

then you probably also have SNMPv3 enabled

A 'show snmp' is useful information.

The RFCs about SNMPv3 stipulate that we can't show user configs and passwords in the viewable config so 'show snmp user' would also be useful to determine what SNMPv3 users are defined on the system.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: