Hi, I need some help on snmp views. In part of our network, we have a series of remote routers connected back to a branch router. No routing protocol is run over the WAN between remote router and Branch router. The Ip subnet of the lan@ the remote router end is on the same network as the lan @ the branch router. (This is a legacy solution!).
The only connectivity my company worry about is the WAN and that is all I want to collect via our SNMP Manager. (that and linkup/linkdown). I've been trying to find a OID value that will prevent the SNMP Management Station from polling and retrieving the IP address of the lan interface @ the remote router end. But I'm struggling - I have tried various OID's all day but the problem I have is that I still want my SNMP Management station to discover the WAN IP address etc., This is part of the snmp config below? Am I doing something wrong? Any advice welcome....
snmp-server view novacm internet included snmp-server view novacm internet.6.3.16 excluded snmp-server view novacm ip.20 excluded snmp-server view novacm ipAddrEntry.1 excluded snmp-server view novacm ip.34.1.2 excluded snmp-server community xxxxxx RW 99 snmp-server community cable-docsis view novacm RW 99
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...