I am using SNMP to perform a HTTP test on a Cisco 3560 (12.2.25). The test should make the switch poll a website and retrieve statistics on its results. I have successfully performed ICMP and DNS tests on this same device, but HTTP does not work (Timeout error). There is no authentication required to access this website. I can see the request on the switch using debug. The program I use to perform the test is Spectrum OneClick v8.1. I believe this program uses the SAA agent on the switch to perform the test. Are there any IOS requirements for HTTP tests to work? Is there something in the config I need to enable?
IP SLA (aka SAA or RTR or RTTMON) is not officially supported on the 3560 switches until 12.2(40)SE. While many features will work prior to that release, any bugs or missing features will not be addressed.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.