Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMPv3 config question

Hi there,

I'm trying to configure snmpv3 on a 26xx with authpriv but the "priv" option is not available:

swatm(config)#snmp-server group v3group v3 ?

auth group using the authNoPriv Security Level

noauth group using the noAuthNoPriv Security Level

I'm running the following image:

c2600-i-mz.123-26.bin

Is it a question a feature set ?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: SNMPv3 config question

Yes. You need a crypto image (one with k9 in the feature set name) in order to support SNMPv3 authPriv. With IP ONLY, you'll only be able to do authNoPriv.

2 REPLIES
Cisco Employee

Re: SNMPv3 config question

Yes. You need a crypto image (one with k9 in the feature set name) in order to support SNMPv3 authPriv. With IP ONLY, you'll only be able to do authNoPriv.

New Member

Re: SNMPv3 config question

Makes sense. Thanks a lot for the fast answer !

162
Views
0
Helpful
2
Replies