Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMPv3 sample config (3750)

Does anyone have a short sample config for SNMPv3 I can use as a model on a 3750? I'm wanting to collect stats and push/pull config and IOS changes with CW2000 using SNMPv3.

Thanks,

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: SNMPv3 sample config (3750)

Sorry:

snmp-server group v3group v3 auth context vlan-177

7 REPLIES
Cisco Employee

Re: SNMPv3 sample config (3750)

snmp-server group v3group v3 auth write v1default

snmp-server user v3user v3group v3 auth md5 v3user123

Since the 3750 is a switch, you will also need to add a group entry for each VLAN context (if you want Campus Manager to work with it). Use the "show snmp context" command to see all contexts. For each one, you need to add:

snmp-server group v3group v3 context CONTEXT

Where CONTEXT is one of the contexts seen in the output of "show snmp context".

New Member

Re: SNMPv3 sample config (3750)

Thanks,

Is it the same on a 6509? (Modular IOS) as far as the CONTEXT and vlans?

Cisco Employee

Re: SNMPv3 sample config (3750)

Yes.

New Member

Re: SNMPv3 sample config (3750)

For some reason it doesn't like the (context) key word. Am I missing a something?

#snmp-server group v3group v3 context vlan-177

^

% Invalid input detected at '^' marker.

snmp-server group v3group v3 ?

auth group using the authNoPriv Security Level

noauth group using the noAuthNoPriv Security Level

priv group using SNMPv3 authPriv security level

Cisco Employee

Re: SNMPv3 sample config (3750)

Sorry:

snmp-server group v3group v3 auth context vlan-177

New Member

Re: SNMPv3 sample config (3750)

CW2000 is still not collecting, do I need the SNMP-server engineID remote command? And if so, do you know the syntax?

Is there a way to see if CW2000 is trying and the switch is refusing?

Thanks,

Cisco Employee

Re: SNMPv3 sample config (3750)

No, you do not need to configure the remote engineID. You can use a sniffer trace to see if LMS is properly querying the switch.

4932
Views
5
Helpful
7
Replies