Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

SNMPv3 Traps issue

Hey all,

I have configured my routers with the following configuration

snmp-server ifindex persist 
snmp-server view ADMIN_VIEW iso included
snmp-server group ADMIN_GROUP v3 priv read ADMIN_VIEW  write ADMIN_VIEW

snmp-server user ADMIN_NMS_USER ADMIN_GROUP v3 auth sha pass123 priv des56 pass123

snmp-server enable traps snmp linkup linkdown
snmp-server host 10.1.1.1 traps version 3 priv ADMIN_NMS_USER

logging buffered 4096 notifications
logging trap notifications
logging source-interface FastEthernet0/1.1
logging 10.1.1.1
snmp-server trap-source FastEthernet0/1.1
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps envmon
snmp-server enable traps config
snmp-server enable traps ospf state-change
snmp-server enable traps ospf errors
snmp-server enable traps cpu threshold
snmp-server enable traps ipsla

I am able to poll the device and also receiving syslog messages but not traps when ospf adjacency changes or when ip sla reports failure.

Please help

Thanks

Zeeshan

1 REPLY
Cisco Employee

Re: SNMPv3 Traps issue

Try changing ADMIN_GROUP to:

snmp-server group ADMIN_GROUP v3 priv read ADMIN_VIEW write ADMIN_VIEW notify ADMIN_VIEW
265
Views
0
Helpful
1
Replies