Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SNMPv3 Traps Nexus and Engine ID

I am trying to configure SNMPv3 TRAPS on Cisco Nexus running 5.2 NxOS.  I need to be able to configure an SNMP Engine ID, but the OS appears to only support Engine ID for informs, not traps.  Is there a way to configure the engine ID for SNMPv3 TRAPS in Nexus?

 

 

  • Network Management
Everyone's tags (1)
1 REPLY
Cisco Employee

Hi ,

Hi ,

That is not the case , SNMPV3 traps should just work fine.

Have you configured the below commands:

snmp-server host  use-vrf <vrf name>

for e.g

snmp-server host  use-vrf default

Thanks-

Afroz

 

***Ratings Encourages Contributors ***

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
25
Views
0
Helpful
1
Replies