I'm currently testing a feature with the network monitoring tool OpUtils which enables you to auto-discover a devices IP subnets using snmp. I can't get this to work using snmpv3, but it works fine using snmpv2.
My guess is the default 'snmp read view' (as it's not specified) doesn't include the MIBs/OIDs Oputils needs to poll using snmpv3? If this is the case I haven't been able to find what exactly what view & OID I need to specify to allow this? e.g. snmp-server view oputils <OID> included
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...