Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

snmpwalk on device center

we have new LMS 3.1 the snmpwalk option on device center is not working on all devices, say "please wait" but stay like that for 3-4 minutes then go. from the server itself snmp working without a problem.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: snmpwalk on device center

What was your starting OID? It can take a LONG time for SNMP Walk to return if you do not choose a starting OID, or if your starting OID is too shallow in the MIB tree. Try a more specific OID like ifTable or system.

2 REPLIES
Cisco Employee

Re: snmpwalk on device center

What was your starting OID? It can take a LONG time for SNMP Walk to return if you do not choose a starting OID, or if your starting OID is too shallow in the MIB tree. Try a more specific OID like ifTable or system.

Community Member

Re: snmpwalk on device center

with ifTable working, I use to on old system ifDesc for starting OID but on this one no response for ifDesc. anyways it's working that's all I need. thank you so much for your help!!!

155
Views
0
Helpful
2
Replies
CreatePlease to create content