I sniffed the snmp packets I sent to the switch and it turns out that I'm sending a get-next request with OID 188.8.131.52.2.1 which is... pretty standard I guess, as I use the same command for other devices and it works. Again sniffing the snmp traffic reveals that the snmpwalk program uses the same initial OID to start "walking" the node.
Am I missing something?
The switch in question is Catalyst WS-2960G-24TC-L with c2960-lanbasek9-mz.122-52.SE image.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.