root@linux:/# snmpget -v 2c -c public 192.168.1.58 126.96.36.199.188.8.131.52.6184.108.40.206.3
iso.220.127.116.11.18.104.22.16822.214.171.124.3 = No Such Instance currently exists at this OID
hmmm, no value. At this point I realized that probably i need something like an index (similar to ifIndex) to distinguish several 3G modules within the same device. So i did:
root@linux:/# snmpwalk -v 2c -c public 192.168.1.58 126.96.36.199.188.8.131.52.6184.108.40.206.3
iso.220.127.116.11.18.104.22.16822.214.171.124.3.23 = INTEGER: 2
voila, i got the value. Here comes the question: what is this index 23 and what is the way to find it out without doing the walk?
I tried to pull all the values 23, hoping to get some interface description or name, and one of my findings revealed that 23 is probably the module index, but I'm not sure if i've found the right thing:
root@linux:~# snmpwalk -v 2c -c public 192.168.1.58 126.96.36.199.188.8.131.52.184.108.40.206
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...