Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Bronze

Solution server installation - Views are missing

Hello,

our LMS is a solution installation with three Win2k3 servers.

1. Master -> CS, CM

2. Slave -> RME

3. Slave -> IPM, DFM

I registered all the three applications from the slaves on the master.

They are available in the "Functional"-view.

But the seperate views for RME, IPM and DFM are missing on the top of the LMS portal!

On another LMS installation with only one server all views are present by default...

Must I create the views by hand over the "Manage Views" -> "Add View" -> "Add Portlet" -> "Others" -> "Remote Portlet" ?

Thanks a lot!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Solution server installation - Views are missing

Yes. While you can register remote applications, you cannot automatically register their views. Not all portlets are "remotable".

2 REPLIES
Cisco Employee

Re: Solution server installation - Views are missing

Yes. While you can register remote applications, you cannot automatically register their views. Not all portlets are "remotable".

Bronze

Re: Solution server installation - Views are missing

Oh....that's a pity!

But okay, now I know that and can configure it by hand as it is shown on the original views.

Thanks a lot!

100
Views
0
Helpful
2
Replies
CreatePlease to create content