Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

specifying seed device in a file

Hello,

Could you please tell me why my seed device does not work.

The hop count is not shown after import.

I use lms3.2

Regards

Michel Misonne

2 REPLIES

Re: specifying seed device in a file

Are you able to ping the devices from the LMS server  and why is the hop count 15? Test it out without hop count.

First enable CSDiscovery debugs with Neighbor module selected from "Device and Credentials Device Discovery Discovery Logging Configuration" and attempt to discover. Post the ngdiscovery.log and csdiscovery.log from CSCOpx/log directory.

New Member

Re: specifying seed device in a file

Hello,

I am sorry, because I was not clear enough in my problem description.

I asked you to tell me why my file format is not good.

Of course, I can manually add the device  in the seed setting

But I can not add those device  with an import of the file like previously included.

..

If I put a file with more than 3 device in it, it fails.

The file  like that is OK:

172.19.19.251|15
172.19.69.1|15
172.20.1.245|15

But the file like that is NOT OK: It give a strange screen after importing this file.Please try

172.19.19.251|15
172.19.69.1|15
172.20.1.245|15
172.20.105.245|15

Why ?

Regards,

Michel

195
Views
0
Helpful
2
Replies
CreatePlease to create content