Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

SSL issue on LMS 2.5

We installed Common Services of LMS 2.5. We are having problem logging on the homepage. A pop up message stating that we will be redirecting to unsecure page is coming out continuously..

5 REPLIES
Silver

Re: SSL issue on LMS 2.5

That is because you log in on a https page (secure because you send a password) and are redirected to a http page.

It is your browser nagging by the way and has nothing to do with ciscoworks.

You can tell ciscoworks to use port 443 (https) all the time. That will also stop your browser from nagging.

Cheers,

Michel

Community Member

Re: SSL issue on LMS 2.5

We also tried to use two different client browsers. But same problem occured. However, what will the steps to tell ciscoworks to use port 443 all the time?

Community Member

Re: SSL issue on LMS 2.5

We enabled SSL using CLI then restart daemon. But when we tried to login, we still cannot get into the homepage. There is no pop up message nagging. Only a status at the bottom left saying " contacted, waiting for reply." is flashing repeatedly.

Silver

Re: SSL issue on LMS 2.5

Hmm, I would not how to do this using cli.

Via te gui it's

Common Services -> Server -> Security -> Single-Server Management -> Browser-Server Security Mode Setup

Set to enable.

By the way if you reset the daemons give it some time before trying the gui. (5 min)

Cheers,

Michel

Community Member

Re: SSL issue on LMS 2.5

Hi,

we cant log on to CWHP yet, the website is redirecting us. btw, we installed Ciscoworks in a Solaris platform.

it doesn't allow us to login, not at all. what could be the problem? thanks.

103
Views
0
Helpful
5
Replies
CreatePlease to create content