Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SSM - Incorrect IF-MIB Status

I noticed that something strange from the MIB status for my AIP-SSM module.

SSM is running on version Version 7.0(8)E4

The physical interface is up but SNMP information is showing it as down.

# show interfaces brief

CC   Interface            Sensing State   Link   Inline Mode   Pair Status  

*    GigabitEthernet0/0   Disabled        Up                                

     GigabitEthernet0/1   Enabled         Up     Unpaired      N/A

snmpwalk via ifAdminStatus

--------------------------------------

IF-MIB::ifAdminStatus.1 = INTEGER: up(1)

IF-MIB::ifAdminStatus.2 = INTEGER: down(2)

IF-MIB::ifAdminStatus.3 = INTEGER: up(1)

IF-MIB::ifAdminStatus.4 = INTEGER: up(1)

snmpwalk via ifDescr

--------------------------------------

IF-MIB::ifDescr.1 = STRING: lo

IF-MIB::ifDescr.2 = STRING: ge0_1

IF-MIB::ifDescr.3 = STRING: ge0_0

IF-MIB::ifDescr.4 = STRING: sy0_0

snmpwalk via ifOperStatus

--------------------------------------

IF-MIB::ifOperStatus.1 = INTEGER: up(1)

IF-MIB::ifOperStatus.2 = INTEGER: down(2)

IF-MIB::ifOperStatus.3 = INTEGER: up(1)

IF-MIB::ifOperStatus.4 = INTEGER: up(1)

Unable to find any bugs related to the IPS version.

Thanks in advance.

152
Views
0
Helpful
0
Replies
CreatePlease to create content