Thanks in advance to those who even read this topic and Many thanks to those who will reply. Here is my problem:-
I have to search for devices which do not have standby ip authentication setup. I have tried multiple permutation and combinations to setup a template both basic and advanced to match the standby <group number> ip authentication command in device config. But sadly all devices show as compliant.
Can someone help me with making a template to achieve this?
Do you mean the "standby authentication " command? It would be helpful to see a current running config to know exactly what you want to match on. I'd also like to see one of your existing templates to get a better idea what you're trying to do. In my head, I'm picturing something like:
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...