start to NAM

[robin_goel]

Hi folks,

I am new to LMS2.5. Plz tell me how can i acess my NAM. Is there any URL or GUI or somehow?

thnaks

[leonvd79]

I cannot see how the NAM (Network Analysis Module) relates to CiscoWorks LMS 2.5. As far as I know the NAM has a separate (Web-based) user interface.

Depending on your configuration the NAM is available at http://:/

HTH

--Leon

* Please rate posts.

[robin_goel]

HI leon,

Can u tell me which port no is used for this service?????

thanks

robin

[a.buergin]

Hi Robin,

typically Port 80 (standard http).

But you first have to configure your NAM!

http://www.cisco.com/en/US/products/hw/modules/ps2706/ps5025/index.html

Andy

[David Stanford]

To access the NAM you would just use:

http:// or if enabled https://

Not sure what type of device you have the NAM in, but you could have a look at this link for a NAM in a cat6K to get started:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/nam/svc_nam/3_4/6kqsg/qsg.htm

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/nam/svc_nam/3_4/user/capting.htm

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/nam/svc_nam/3_4/user/index.htm