03-31-2010 09:57 AM
Hi. I noticed that this script acting weird from time to time. It works fine 80% of the time but sometimes It stops randomly with --------------------more---------------- response on the screen and "enter" key must be pressed multiple times to complete it. The is no errors being showed on the screen. The following script is ran manually using alias and switches certain ports on the switch from one vlan to another based on administrator input. The switch is 6509 with SUP32 running 12.2(33)SXI3 IOS version. Any ideas? Did someone have similar problem? Thank you.
Solved! Go to Solution.
03-31-2010 10:35 PM
This is CSCsm37007. It is fixed in recent versions of EEM 3.0 which is not available for your platform. As a workaround, you can do "term len 0" before running the command.
--
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com
03-31-2010 10:35 PM
This is CSCsm37007. It is fixed in recent versions of EEM 3.0 which is not available for your platform. As a workaround, you can do "term len 0" before running the command.
--
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com
04-01-2010 06:54 AM
Thank you, Joe.
It still happens though but not as often as it used to. I can live with it
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide