Switch port summary report in LMS 3.0 (campus manager)
When i do a switch port summary report to se how many ports we acctuly have, then i see somesthing wrong. when i eg. do the report on a 24 port switch, the report says that there is a total of 29 port, and 4 is conneceted. The correct number a total of 26 port, and only 2 connected. another example is a stacked switch with a total of 168 ports. There report tells me that there is 190 ports. Why is that ?
Re: Switch port summary report in LMS 3.0 (campus manager)
I found a workaround to this. If i make a device attribute report, and import the .csv file to an Exel document and add up all the cells containing the number of port per switch, then i can see the total number of ports.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...