Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Syslog problem - LMS 2.6

Hello,

How I can check which syslog's file is source for RME (when RME generate reports) and Can I change this file to different?

Solaris LMS 2.6 RME 4.0.5

Regards

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Syslog problem - LMS 2.6

Look at the /etc/syslog.conf and look for the entry:

# Added for Cisco Syslog Analyzer (begin)

local7.info /var/log/syslog_info

# Added for Cisco Syslog Analyzer (end)

You can make your changes here to the location and make sure to do a HUP on the syslogd process after changing.

4 REPLIES
Cisco Employee

Re: Syslog problem - LMS 2.6

Look at the /etc/syslog.conf and look for the entry:

# Added for Cisco Syslog Analyzer (begin)

local7.info /var/log/syslog_info

# Added for Cisco Syslog Analyzer (end)

You can make your changes here to the location and make sure to do a HUP on the syslogd process after changing.

Cisco Employee

Re: Syslog problem - LMS 2.6

Beyond changing /etc/syslog.conf, you will have to tell RME where to look for the new syslog message file. This is done by running:

NMSROOT/bin/perl NMSROOT/bin/syslogConf.pl

When dmgtd is shutdown.

New Member

Re: Syslog problem - LMS 2.6

Thanks for information.

I have changed my syslog.conf and now all is ok.

Before my file which store syslog information was defined like: /var/log/cw2k.log (I don't know why).

BTW. I studied manual and I found inforation that most of RME's syslog information is stored in $NMSROOT/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/csc/data/Collector.properties

Regards

Cisco Employee

Re: Syslog problem - LMS 2.6

Correct, Collector.properties is the location for all the SyslogCollector's configuration. However, the syslogConf.pl script was added in LMS 2.6 to avoid having to edit Collector.properties directly.

152
Views
14
Helpful
4
Replies