Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

syslog problem

my 3 core routers are config. for sending syslog to LMS server. only one 3660 is sending syslog. rest two 3660 and 7609 is not sending log.

the config for syslog is

logging on

logging "LMS server IP"

what is the problem

2 REPLIES
Silver

Re: syslog problem

Set also the level of logging with

logging trap "level"

command. (eg. to logging trap debugging)

bye

FCS

Please rate me if I helped.

Cisco Employee

Re: syslog problem

This config should work and send messages at the default level. You might want to try and generate a syslog message from a failing device which enabling a packet capture from the syslog server. You can then see if the messages are making it to the server or blocked somewhere along the way.

162
Views
0
Helpful
2
Replies