Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

SyslogCollector issues

Hello,

I'm running LMS3.2, RME 4.3.1, CS 3.3.0 on Solaris 10.

SyslogCollector and SyslogAnalyzer are working properly most of the time.
Hello,

Every now and then, the SyslogCollector or the SyslogAnalyzer seems like they stop responding.
When checking them with 'pdshow SyslogCollcector SyslogAnalyzer' they appear to be running. However, they are not doing their work.
Syslog reports are empty when this happen (which indicate the collector is not running properly). Automated action (via the Analyzer) are not executed.
If I try to stop them with 'pdterm SyslogCollector SyslogAnalyzer' and then restart (with pdexec) they both stopped and then up again.
However, when checking the collector status through the GUI (RME-->Tools-->Syslog Collector Status) it says that the collector is not reachable.
If I top the whole server with dmgtd stop and then dmgtd start, the whole server is running again but the collector isn't. The only solution I found to this situation is to reboot the server. After reboot everything is up and running again.


1. Why this happen?
2. How can we fix/avoid it?
3. How can we stop/start both services without rebooting the server?

Thanks,
Amit

1 REPLY
New Member

Re: SyslogCollector issues

Anyone?

167
Views
0
Helpful
1
Replies
CreatePlease to create content