We have a Client-Server enterprise network, and nature of servers is to broadcast some stats/info to all the clients.
We are using two 6509-E at core with HSRP to provide the redundancy for servers. I have attached the network layout (not the real one) with some description with this thread. On both switches we have configured “ip helper-addresses” to forward the broadcast to multiple destinations(different VLANs). Every thing is working fine with respect to HSRP.
Under normal circumstances, both ACTIVE and STANDBY hsrp switches generates broadcast which causing duplication of every broadcast packet and Client end receiving every packet twice. Cisco already claimed that standby switch will forward the broadcast. As an alternate TAC has advised to use the TCL script as a work around which we attempted to however no success at the end.
Please let me know if some one can help me in modifying TCL script.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...