Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Telnet on web,...

Hi!

I need to show a telnet on Web (on flash/php).

Telnet to router and showing the result in Web.

it is possible?

please help.-

Regards,

Michael Angel.-

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Telnet on web,...

Would it suffice to turn on the device(s) web server (s) and use that interface? 'ip http server' is the configuration command. Once you then browse to the device, one can enter all commands one would normally pass over telnet (via http instead of into vty port).

Remember, both default telnet and http are unsecure. I recommend using ssh and https wherever possible to secure your control plane.

1 REPLY
Hall of Fame Super Silver

Re: Telnet on web,...

Would it suffice to turn on the device(s) web server (s) and use that interface? 'ip http server' is the configuration command. Once you then browse to the device, one can enter all commands one would normally pass over telnet (via http instead of into vty port).

Remember, both default telnet and http are unsecure. I recommend using ssh and https wherever possible to secure your control plane.

106
Views
0
Helpful
1
Replies
CreatePlease to create content