Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Terminal Server Problem

The problem being we can't seem to enter commands, although all the text appears on the screen correctly, I am told that if you connect a laptop to the port on site then this also works correctly. We have a number of sites where this is a problem, we have tried to replicate in the lab but can't get it to fail. For pin outs etc see Steve Evans.

This gives details of connectivity on site.

Connected to STNWES-L3234-02 MPM1 on 213.186.5.78 port 2071

System>login

login: command not found

System>

login

System>

Config attached.

3 REPLIES
New Member

Re: Terminal Server Problem

Config

New Member

Re: Terminal Server Problem

is there a way to configure a router with a frame relay broadband access and 4 E1's going to a PBX so that, when an incoming call comes from the FR broadband access and all the voice channels in the 4 E1's are in use, the router puts the incoming call in queue until a voice port is free, connecting the first call in queue?

Hall of Fame Super Silver

Re: Terminal Server Problem

Enrique

I am not aware of a way to have the router queue traffic in this way.

HTH

Rick

100
Views
0
Helpful
3
Replies