I am not able to copy the configuration file from 1900 to tfpt server because there is no option in the menu to go to the commnad line (K). when I log into the switch immediately the menu appears. Is there any option to save the confirguration to tftp?
You can use the Configuration File Upload and Download feature to specify switch configuration commands in an ASCII file that can be uploaded to or downloaded from a TFTP server. When the switch powers up, it can retrieve its configuration from a TFTP server. check the following link for upload/download of the configuration file :
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...