Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

Threshold breach in ciscoworks LMS 3.1

Can threshold breach notification be configured and monitored via DFM, if i dont have HUM.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Threshold breach in ciscoworks LMS 3.1

Yes, it does this automatically as well. The free memory and CPU utilization thresholds can be configured.

3 REPLIES
Cisco Employee

Re: Threshold breach in ciscoworks LMS 3.1

It depends on the threshold. DFM will monitor certain attributes by default, and trigger events if configured thresholds are violated. For example, you can configure an interface utilization threshold of 60%, and when that is crossed, a HighUtilization event will be fired.

However, you can't monitor arbitrary SNMP objects for threshold violations.

Re: Threshold breach in ciscoworks LMS 3.1

Can DFM monitor the CPU and memory utilisation threshold.

Cisco Employee

Re: Threshold breach in ciscoworks LMS 3.1

Yes, it does this automatically as well. The free memory and CPU utilization thresholds can be configured.

180
Views
0
Helpful
3
Replies
CreatePlease to create content