cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1004
Views
10
Helpful
1
Replies

Time Zone Problem - Cisco Works 2000 RME 3.5 2005

stephan.meier
Level 1
Level 1

Time Zone Setting on Devices is CEST

Time Zone Setting on Server is MET

Time Zone Output in Reports is shown as MEST!!! Should be CEST!!!

What is the Solution to this problem?

1 Reply 1

b.speltz
Level 4
Level 4

The RME timestamp is controlled by the web server on your machine. RME timezone support info can be found at:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/rel_nt/2_1/5337_02.htm#xtocid277393

If RME receives the timezone information from the devices and is one of the supported timezones, there would be no problem here. But if the timezone received is unknown to the system, then the problem of inconsistent timezones is observed. In addition, after changing timezone configuration, it is necessary to restart all CiscoWorks applications.

Also, please use the procedures listed at the following URL to ensure timestamp configuration on the devices and client browser computer are set up correctly:

http://www.cisco.com/warp/customer/477/RME/rme_syslog.html#correct

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco