I am in sudamerica in Uruguay and we are in an area of GMT -3, now we are in summer for what we advance 1 hour then we are in summer in GMT -2, the server that has installed the LMS 2.6 has the correct hour, but the module of IPM this advanced 2 hours.
that is to say, the module IPM this with the hour of GMT -2
current hour of the server in summer 9 AM, hour of the module IPM 11 AM
is it correct that the module IPM this with the hour of GMT you can solve this problem?
1- this well that it is the final patch cwipm2.6-win-CSCsm43797.zip for Windows ?
2- In the readme cwipm2.6-winCSCsm43797.readme.pdf it indicate that it is necessary to install first the patch for windows, this is the final patch that microsoft has for the windows ?
3- In the readme cwipm2.6-winCSCsm43797.readme.pdf it indicate that it is necessary to install the Common Services 3.0.5, in this URL: http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-cd-one the final Common Services is: cwcs-win-CSCsu84143-01.zip (Common Services DCRServer Patch on Windows ) ???
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...