Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

topology map in CM device unknowm

I use switch 3560G-24TS.In device center the type of device is very well specified but it appears unknown in topology map.it is just specified ciscoProducts.615.What I must make for visualizing the device well

7 REPLIES
Cisco Employee

Re: topology map in CM device unknowm

Which version of CM are you running? I see that the 3560G-24TS is supported in CM 4.0.3.

New Member

Re: topology map in CM device unknowm

I'm running CM version 4.0.3 and 3560G-24TS is in device package but for may topology map it is view as unknown device. Help me please.

New Member

Re: topology map in CM device unknowm

Hi,

If you are using LMS2.5.1, upgrade it to LMS2.6. I had a similar problem for access points, and after upgradation the problem was solved.

HTH

sathappan.s

Anonymous
N/A

Re: topology map in CM device unknowm

Cisco Employee

Re: topology map in CM device unknowm

Support for the Cat 3560G-24TS with sysObjectID 1.3.6.1.4.1.9.1.615 was added in Campus Manager 4.0.4. You will need to upgrade. It is recommended you upgrade to LMS 2.6 which is downloadable from Cisco.com at http://www.cisco.com/cgi-bin/tablebuild.pl/lms26 .

New Member

Re: topology map in CM device unknowm

Thank you very much for your assistance!

Cisco Employee

Re: topology map in CM device unknowm

Sorry, my mistake above...was thinking it was 4.0.3, when it was 4.0.4 (read the wrong table)....thanks for correcting

161
Views
0
Helpful
7
Replies
CreatePlease login to create content