I need to monitor the application/traffic patterns moving across my router.I would be using nbar for this(hope this is gud).I would be attaching this to my wan interface..which i hope should be correct & best?
I am also trying to view the outputs as graphs on mrtg which runs on window platform for which i would need MIB id.
Any idea whats the MIB for this & how would i actually use the MIB to depict the result in graphical format.
Please help with anyother information useful to attain my goal.
Netflow should be easier to "view" than NBAR. You can either view the results locally on the router, the ports are in hex, so it's pretty clumsy. You can use a 3rd party app which will give you nice graphs. Here's a link to a free edition (limit to 2 interfaces) of some software that we use.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...