Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Troubleshooting RME Inventory collection

I've got a router that just won't inventory in RME. I've checked:

1) Device is supported - Cisco 2651XM

2) Device IOS is supported - greater than 12.1 (14)

3) Credentials are correct - credential verification report shows that

4) SNMP communication is permitted - snmpwalk is successfull from the CW host

What really has me confused is I've got the configuration archiving successfully, it just won't inventory.

Anyone have any further suggestions of things I can look at?

4 REPLIES
Cisco Employee

Re: Troubleshooting RME Inventory collection

Check the IC_Server.log for errors pertaining to this device. It could be a bug in RME or a bug in the device instrumentation.

New Member

Re: Troubleshooting RME Inventory collection

Hi jclarke, thanks for your reply.

Is there any way I can tell what kind of bug I'm dealing with from the log? I'm running the latest RME, but I can patch that much easier than I can upgrade the IOS on the router so I'd rather it was at fault.

From the log all looks okay until:

[ Fri Dec 22 10:34:28 GMT 2006 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,685, Collection failed for the device : 206

com.cisco.nm.xms.xdi.ags.system.CollectionFailed: com.cisco.nm.xms.xdi.ags.system.CollectionFailed: com.cisco.nm.lib.snmp.lib.SnmpAgentLoopException: Terminating walk : Agent Loop detected.

at com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter.ContainmentAGI_ENTITY_Mib.populatingTheChassis(ContainmentAGI_ENTITY_Mib.java:192)

at com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter.ContainmentAGI_ENTITY_Mib.g$eval(ContainmentAGI_ENTITY_Mib.java:124)

at com.cisco.nm.xms.xdi.ags.ContainmentAGI.g$eval(ContainmentAGI.java:21)

at com.cisco.nm.xms.xdi.SdiEngine.initAndEvalAGIs(SdiEngine.java:301)

at com.cisco.nm.xms.xdi.SdiEngine.request(SdiEngine.java:226)

at com.cisco.nm.xms.xdi.SdiEngine.getDevRepr(SdiEngine.java:219)

at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:467)

at java.lang.Thread.run(Thread.java:534)

[ Fri Dec 22 10:34:28 GMT 2006 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,767,Device collection failed for x.x.x.x

cheers, Ari.

Cisco Employee

Re: Troubleshooting RME Inventory collection

This is a device bug. The device is looping in the ENTITY-MIB. You should open a TAC Service Request so additional debugging can be done (i.e. obtain a sniffer trace to know which objects are looping), and a bug can be located.

New Member

Re: Troubleshooting RME Inventory collection

Hello.

I have exactly the same problem.

I have 2 devices : (same hardware, same IOS, etc...)

For one it functions well.

For the other it does NOT function.

When i Do a "snmpwalk" from the DOS windows, i have a loop on this object :

iso.3.6.1.2.1.4.20.1.1.20.168.40.2 = IpAddress: 20.168.40.2

iso.3.6.1.2.1.4.20.1.1.20.118.240.1 = IpAddress: 20.118.240.1

Error: OID not increasing: iso.3.6.1.2.1.4.20.1.1.20.168.40.2

>= iso.3.6.1.2.1.4.20.1.1.20.118.240.1

When i launch an "update inventory" from Ciscoworks and sniff the flows with the WXP "network monitor" tool, the loop is located on these OB ID :

1.3.6.1.4.1.9.9.10.1.1.2.1.x

I can send you the trace

Thks

217
Views
0
Helpful
4
Replies