The installation notes specify a minimum spec of a Pentium 3 - 750Mhz. I assumed that the software would operate better in a dual processor environment but this appears not to be the case. The installation notes mention that the software (ACS v3.3) doesnt take advantage of Dual Processor systems.
Would the above spec be ok to install the software or would you recommend a beefier system ? Does anyone know the roadmap for ACS, i.e will a version be released to take advantage of Dual Processor systems ?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...