07-06-2009 10:38 AM
Am unable to successfully collect inventory from from my cat6509-v-e running 12.2(33)SXI with either LMS 3.1 or 3.2. Am able to collect inventory form other devices so it is something specific to this device type or IOS version. Would appreciate any troubleshooting ideas. Have included the section of the IC_Server.log for this device.
Thanks in advance
Solved! Go to Solution.
07-06-2009 11:59 AM
Inventory collection in LMS 3.1 with SXI is broken. However, this should work in LMS 3.2. The problem you're seeing here is due to an SNMP timeout polling the CISCO-FLASH-MIB. Just increase the SNMP timeout from 2 seconds to 10 seconds for this device under RME > Devices > Device Management > RME Devices > Edit Device Attributes.
07-06-2009 11:59 AM
Inventory collection in LMS 3.1 with SXI is broken. However, this should work in LMS 3.2. The problem you're seeing here is due to an SNMP timeout polling the CISCO-FLASH-MIB. Just increase the SNMP timeout from 2 seconds to 10 seconds for this device under RME > Devices > Device Management > RME Devices > Edit Device Attributes.
07-06-2009 12:52 PM
Thanks and I will try that in the morning. I raised the SNMP timeout to 30 seconds and that didn't work but not sure that I changed it in the same place. Will post after I try to change that you recommended.
07-07-2009 05:13 AM
Thanks. Checked this morning and was able to get it working with your suggestion. Successfully imported and exported the config.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide