Unable to detect IPS and ASA

[leo_zidane]

Currently my Device fault manager is ver 2.0.6. I am unable to detect my ASA 5510 and my IPS. Is there any workaround so i can receive snmp traps?

[nasim_nasri]

ASA 5510 is not supported only ASA 5520 is supported and IPS is not supported .

HTH

[Sushil Kumar Katre]

Hi Leo,

Have a look at the following compatibility list -

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_device_fault_manager/2.0_IDU_2.0.6/device_support/table/dfm2_0_6.html#wp62279

ASA 5510 and IPS is not supported by DFM 2.0.6.

ASA 5510 support is added in LMS 3.0.

-> Sushil

[leo_zidane]

Cause i only have LMS ver 2++ which is just purchased. Now Cisco comes out LMS ver 3. So the ASA is unable to detect by my LMS.