Unable to import device exclusion file from common services after LMS upgra
Customer says he upgraded to LMS3.1 some months ago and had imported his exclusion file for the last couple of months with no issues but today it is having an issue and brings up the following error messahe :
Unable to import device exclusion file from Common Services.
The following steps are used when importing exclusion file:
Go to Common Services/Device and Credentials/Device management/
Click on Exclude Tab
Click on the Browse Tab
Select the following path: D:/LocalApp/CISCOW~1/CSCOpx
Select the file which contains list of devices to be excluded which is in csv format.
Refer to attached file for current format used as exclusion file in csv format
Then......the following error is received form CiscoWorks:
Error in opening exclude file D:/LocalApp/CISCOW~1/CSCOpx/CW2000_Device_Exclusion.csv.
Please check whether the file name and path are correct. Also check whether this file has the proper casuser permissions.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...