Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unable to map Raw Alarms with Physical Inventory Data from LMS 3.2

We would like to verify if there is a way to forward the inventory data and events log of Ciscoworks LMS to other NMS automatically.

Our client tried integrating LMS 3.2 with their Clarity NMS but were unable to map Raw Alarms with Physical Inventory Data.

They were trying to analyze the sample raw alarms received from Ciscoworks, but had an issue in mapping the raw alarm with the equipment inventory data due to the lack of information.

Below are some sample raw alarms received from IPBN Ciscowors NMS (IP Address: 10.220.10.1):

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

2420: 2011-11-25 12:10:46 Received trap ==> Received SNMPv1 Trap

Community=ciscoworks

Enterprise=1.3.6.1.6.3.1.1.5

Generip trap type=2

Specific Trap Type=0

Trap From=10.220.10.1

Trap ID=1.3.6.1.6.3.1.1.5.2

Trap Time=-1436283373

1.3.6.1.2.1.2.2.1.1.83=83

1.3.6.1.2.1.2.2.1.2.83=GigabitEthernet1/40

1.3.6.1.2.1.2.2.1.3.83=6

1.3.6.1.4.1.9.2.2.1.1.20.83=Lost Carrier

EndTrap

10933: 2011-11-24 11:57:53 Received trap ==> Received SNMPv1 Trap

Community=ciscoworks

Enterprise=1.3.6.1.4.1.9.1.291

Generip trap type=2

Specific Trap Type=0

Trap From=10.220.10.1

Trap ID=1.3.6.1.4.1.9.1.291.2

Trap Time=1628056965

1.3.6.1.2.1.2.2.1.1.8=8

1.3.6.1.2.1.2.2.1.2.8=E1 0/0/0

1.3.6.1.2.1.2.2.1.3.8=18

EndTrap

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Everyone's tags (5)
519
Views
0
Helpful
0
Replies