cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
494
Views
0
Helpful
1
Replies

Unable to mirror PPPOE traffic - Help

mgupta
Level 1
Level 1

I am using 3560G to receive traffic consisting PPPOE from another switch. Now I want to mirror (SPAN) this traffic to a destination port. But this switch does not show any traffic on destination port for PPOE traffic.

1 Reply 1

mgupta
Level 1
Level 1

We have tried making the source port as trunk port also. In both cases it shows the traffic on source port in packets and bits but on destination port traffic is zero.

We are receiving the traffic from a Huawei switch. We also tested by putting a Dlink converter (Gigabit optical to gigabit copper) in between Huawei switch and a server. The tcpdump clearly shows the PPPOE packets and its details. But in place of server when we connected the 3560G port and tried it to mirror there was no traffic on destination. In same environment the traffic received from other non-Huawei switches, we are able to mirror. We fail to understand why this is happening with Huawei switch. Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: