I am using 3560G to receive traffic consisting PPPOE from another switch. Now I want to mirror (SPAN) this traffic to a destination port. But this switch does not show any traffic on destination port for PPOE traffic.
We have tried making the source port as trunk port also. In both cases it shows the traffic on source port in packets and bits but on destination port traffic is zero.
We are receiving the traffic from a Huawei switch. We also tested by putting a Dlink converter (Gigabit optical to gigabit copper) in between Huawei switch and a server. The tcpdump clearly shows the PPPOE packets and its details. But in place of server when we connected the 3560G port and tried it to mirror there was no traffic on destination. In same environment the traffic received from other non-Huawei switches, we are able to mirror. We fail to understand why this is happening with Huawei switch. Thanks
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...