Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unable to upgrade ios image using in Rme in LMS 3.1

Processing Device : 10.200.200.200

Start Time : Tue Nov 25 13:27:00 GMT 2008

Hello I am testing Lms 3.1 and having problems send configs and also ios upgrades I have checked My snmp setting on the devices and on the Server they are fine this is one of the messages i get.

Device is locked for exclusive access.

The supported protocols for image transfer are: RCP,TFTP,SCP

Connecting to the device using TELNET...

Couldn't connect to the device

Cause: SWIM5001: Cannot connect to the device 10.200.200.200 using TELNET.

Skipping the software upgrade on this device.

Image Copy Operation Failed

Device is unlocked.

Device Upgrade Result : Failed

End Time:Tue Nov 25 13:28:02 GMT 2008

Thanks for any assistance in advance

Marc Dowrich

1 REPLY
Cisco Employee

Re: Unable to upgrade ios image using in Rme in LMS 3.1

According to this, RME cannot telnet to the device. Make sure you have valid username/password credentials in DCR for this device, and that RME is allowed to telnet to it.

261
Views
0
Helpful
1
Replies