If it's simply reporting, one could perhaps make a loopback2 interface (or other non-routed common SVI) and build reports with that interface's description featured. The description could have your desired field.
We could do custom reporting in LMS with a custom field, but we would really like to just have a set line within the config that states the actual Asset number that our company provided to us for property tracking. Again, we thought about placing it within the banner, which would post it up on login, but I wondered what other options may be so that we could possibly track it from within LMS.
I've seen several solutions for random devices which have location ID, but I haven't found any CLI commands for switch location in devices such as 6500 series.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...